Thursday, 13 December 2012

December Project Club - All Aboard


 How to make
  • Onto a piece of pale turquoise card in blue ink stamp “OUT AT SEA......” in three lines across the card, tear the card above the words and add diamond stickles along the torn edge.
  • Stamp the boat, lighthouse, two anchors  and the anchor and ropes onto white card in black ink, colour in the boat, lighthouse and two anchors and cut them out.
  • Next stamp the anchor and ropes onto gray and Kraft card cut the thick rope and star from the white card, the thin rope from the Kraft card and the anchor from the gray card, colour the star gray and reassemble as on the stamp.
  • Stamp “ On Your Retirement” (Grand Word Perfect 2 (Ref: 1803069a)) in black ink onto white card, cut it out so it’s about 8.5cm x 1cm edge with a silver marker pen.
  • Cover a 9cm x 3.5cm piece of white card with strips of ripped pale turquoise card.
  • Stamp the lifebelt into each corner of a 13.8cm x 13.8cm piece of white card and “All Aboard” along each side, repeat this on a 14.8cm x 14.8cm piece of white card.
  • Colour in the bands on the lifebelts in red and blue edge both in a silver pen, attach the smaller one to the inside of a 14.8cm x 14.8 cm twisted easel card, cut away the inside of the larger white square to make a frame, edge the inside cut edge in silver.
  • Onto the top half of a 14.8cm x 14.8 piece of white card attach a piece of pale blue card (leave about 1cm around the edge of the card.
  • Attach the lighthouse to the top right hand side of the card (so you can see part of it when the frame is fixed.
  • Stamp some flying birds in the sky, add the first strip of turquoise sea, then the boat and then the rest of the sea, glue the frame in place and attach to the easel card.
  • Using 3D glue attach the anchor and ropes to the bottom left hand corner
  • Finally attach the turquoise piece of card to the inside of the card, thread “On Your Retirement through the two anchors and attach to the turquoise card.

No comments:

Post a Comment