Happy birthday and an ATC

ATC

With the help of a die cut pencil and bulldog clip I made up a clip board, from a few of the drawing sheets cut up and folded, then glued to clip board with some of the corners curled up and a coffee ring or two (made by inking up a pen top) it looks well used, mounted onto green card.

 Green Easel card

Onto a piece of 13.8cmx13.8cm pale green card randomly stamp the words Gear up for a Celebration and the two small gears and components stamps, in memento rich cocoa ink, also ink around the edge of the card, attach centrally to a piece of 14.8cmx14.8cm square dark green card.

Onto another piece of 13.8cmx13.8cm pale green card, just use the two small stamps and stamp around the sides of the card only, ink around the edges.

Stamp HAPPY BIRTHDAY onto a piece of pale green card, ink around the edge, mount onto dark green card,

Using black stazon ink on silver card stamp four spanners and cut them out, (June 2008project club)or use die cut ones.

I used Spellbinders Sprightly Sprockets S5-048 and cut three of the smaller ones out from silver card, attach them to a piece of dark green card with green brads and added two of the silver spanners, mount this onto silver card and attach to the bottom left hand corner of the mounted pale green card.

Using a 14.8cmx14.8cm dark green folded card have the open ends facing you, and score from the top left hand fold down to the bottom right hand corner of the top piece, attach the front of the card to the left hand triangle only with the sprockets up to the fold of the card.

Centrally attach the other stamped pale green card to the inside of the card, using foam tape attach HAPPY BIRTHDAY across the bottom left hand corner with the two spanners into the corner.